Full Circuit Get it on Google Play
For Android

Find the fault. Fix the root cause.

Customers bring broken chargers, lamps and fans to your workbench. Diagnose them with a multimeter, an oscilloscope and a thermal camera, then repair what actually failed. Every reading comes from a real circuit simulation.

Get it on Google Play

Android 10 and later · Landscape · Plays offline

The oscilloscope on a phone charger's MOSFET drain: a 65 kHz square wave of 394 volts peak to peak, next to the 3D circuit board.
Screenshots

A workbench in your pocket

Real tools on real circuits. Probe the copper, read the waveforms, flip the board and follow the traces.

A work order: a 5 V 1 A USB phone charger that went bang with a flash while charging.
The work orderEach customer brings a device and a complaint. What they describe is only the symptom.
The multimeter in ohms across the charger's mains fuse, reading OL: the fuse is open.
The multimeterVolts, ohms, diode test, continuity and capacitance on any two points of the board.
The oscilloscope showing the switching waveform on the charger's MOSFET drain.
The oscilloscopeWatch a switching converter run, from microseconds to the mains cycle.
The charger board turned over, showing the copper traces and solder joints on the underside, with the meter probes on two pads.
The solder sideTurn the board over to follow the traces and probe the joints underneath.
The title screen in front of the workshop, with a bench supply and an oscilloscope on the bench.
The workshopYour bench, your instruments and a queue of customers.
Features

Physics, not scripts

Faults are put into the circuit, and everything you see follows from them. If you replace only the blown fuse, the shorted part behind it blows it again.

A simulated circuit

Every device is a real circuit, solved as you work. Meter readings, waveforms and heat all come from it.

Real instruments

A multimeter, an oscilloscope, a thermal camera and a soldering iron, each used the way you would at a real bench.

Root causes

Cascading failures, drifting parts, worn bearings, cracked joints and faults that come and go.

Repair it for real

Desolder the bad part, fit a new one, reflow tired joints, then verify the repair before you hand it over.

Daily Repair

The same job for everyone each day, with a score for how cleanly and quickly you fixed it.

Duels and Saboteur

Share a job code to race a friend's ghost, or break a board on purpose and challenge them to fix it.

Privacy

Your workbench stays on your phone

Full Circuit has no internet access of its own. There is nothing to sign up for and nothing that follows you around.

No accountNo adsNo analyticsNo trackingPlays offline
Read the privacy policy